- Farm & Garden
- Pumps & Motors
- Food Processing
- Workshop, DIY & MRO
Brand: Generic ( Made in India )
Akemi 1 Liter Stone Impregnation
SKU: TI-A1-23561
₹1550 (Including GST)
MRP : ₹2400
Get extra ₹23 Discount (On Checkout)
Delivery By: Apr 17 - Apr 19
Qty:
Easy Return
& Refund
Quality
Assurance
Trusted
Delivery
After Sales
Assistance
Buyer
Protection
Short Description
Akemi Stone Impregnation
Quantity 1 Liter
Country of origin: India
Description
Akemi 1 Liter Stone Impregnation is a ready-to-use product based on modified oligomeric alkylalkoxysiloxanes. The product is absorbed by the stone's capillary forces and so penetrates particularly deeply. The catalytic process produces polysiloxane. In addition, a reaction with the silicate substance of the stone occurs, resulting in high efficiency for several years.
Features
:- Stone impregnation is suitable for producing a water and dirt repellent effect on absorbent mineral substances such as natural and artificial stone (polished ground or rough surfaces of marble, lime stone, granite, gneiss, porphyry, cotto, terrazzo, unglazed ceramic tiles, etc.).
- It also works well with bricks, sand-lime bricks, concrete, and mineral-based plaster.
- Penetrates deeply into the stone, making it water-repellent while maintaining vapour permeability.
- Protects facades from driving rain, causes water to pearl, and repels grime.
- Consumption ranges from 1 to 15 m²/liter, depending on the absorbency and composition of the stone.
Specification
:- Brand: Generic ( Made in India )
- Quantity : 1 l
- Form : Liquid
- Model Number : Stone Impregnation
- Color : Clear
First Aid Measures :
- General information : Take affected persons out into the fresh air.
- Position and transport stably in side position.
- Immediately remove any clothing soiled by product.
- After inhalation : Supply fresh air, consult doctor in case of complaints.
- After skin contact ; If skin irritation continues, consult a doctor.
- After eye contact : Rinse opened eye for several minutes under running water. Then consult a doctor.
- After swallowing : If symptoms persist consult a doctor.
- Most important symptoms and effects, both acute and delayed : Headache, Dizziness, Nausea, Breathing difficulty, Coughing, Profuse sweating.
- Hazards : Danger of impaired breathing.
- Indication of any immediate medical attention and special treatment needed : If swallowed, gastric irrigation with added, activated carbon.
- If swallowed or in case of vomiting, danger of entering the lungs.
Firefighting measures :
- Suitable extinguishing agents: CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
- Special hazards arising from the substance or mixture : Formation of toxic gases is possible during heating or in case of fire.
- In case of fire, the following can be released : Carbon monoxide (CO) Nitrogen oxides (NOx) Hydrogen chloride (HCl) Under certain fire conditions, traces of other toxic gases cannot be excluded.
Advice for firefighters :
- Protective equipment : Do not inhale explosion gases or combustion gases.
- Additional information : Cool endangered receptacles with water spray.
Accidental Release Measures :
- Personal precautions, protective equipment and emergency procedures : Ensure adequate ventilation. Keep away from ignition sources. Use respiratory protective device against the effects of fumes/dust/aerosol. Particular danger of slipping on leaked/spilled product.
- Environmental precautions : Do not allow product to reach sewage system or any water course. Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water.
- Methods and material for containment and cleaning up : Dilute with plenty water. Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Ensure adequate ventilation.
Handling and Storage :
- Precautions for safe handling : Precautions for safe handling Keep receptacles tightly sealed. Store in cool, dry place in tightly closed receptacles. Keep away from heat and direct sunlight. When diluting always pour product into water and not vice versa. No special measures required. Ensure good ventilation/exhaustion at the workplace.
- Information about fire and explosion protection : Keep ignition sources away. Do not smoke. Protection against electrostatic charges.
General protective and hygienic measures :
- Do not eat, drink, smoke or sniff while working.
- Apply water proof skin cream before starting work. Immediately remove all soiled and contaminated clothing.
- Do not inhale gases / fumes / aerosols.
- Respiratory protection : In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
- Hand protection : Preventive skin protection by use of skin-protecting agents is recommended. After use of gloves apply skin-cleaning agents and skin cosmetics.
Applications
:- Akemi Stone Impregnation is designed to repel water and filth from absorbent mineral substances such as natural and artificial stone (polished ground or rough surfaces of marble, lime stone, granite, gneiss, porphyry, cotto, terrazzo, unglazed ceramic tiles, etc.).
- It also works well with bricks, sand-lime bricks, concrete, and mineral-based plaster.
Instructions for Use :
- Cleaning. The surface must be clean, completely dry, and free of any coatings. Depending on the type of stone and the level of soiling, the following Akemi products are recommended: Stone cleaner, concrete film remover, rust remover, wax stripper, algae and moss remover, grease and oil remover paste, and graffiti remover. Please refer to the individual technical data sheets. In any case, after cleaning, thoroughly rinse with water. Before receiving its protective coating, the stone must be completely dry. Typically, this occurs within 1-2 days at most
- Before beginning, we propose preparing a 1-2 m² sample area to assess impregnation efficiency, evaluate treated object appearance (color improvement), and accurately determine material consumption.
- Impregnation procedure : a) The ideal temperature for impregnating is 15-25°C with humidity protection for around 2-3 hours. The stone should not be warmed by underfloor heating or direct sunshine.
b) The impregnating efficacy is adequate for fissures less than 0.3 mm. b) In general, one or two wet-in-wet equipment are sufficient. For less absorbent surfaces, we propose diluting with Akemi Nitro Dilution at a ratio of 1:1.
Note :
Disregarding the processing guidelines can lead to irreparable damage.
