Really RAPL-EA-1730, 4 Stroke Two Man Operated Earth Auger of 6 HP with 16 inch (40.64 cm) Bit

Note : Colour may vary

        > Fill the tank with unleaded petrol. No 2T oil needed, there is a separate chamber for pouring the engine oil (20W40).

        > Wear the necessary safety items like boots, gloves, etc for protection.

        > Attach the appropriate auger bit for the desired hole size.

   

         Operator 1:

          - Check fuel level and ensure the fuel line is properly connected.

          - Set the choke to the "choke" position.

          - Prime the engine by pumping the primer bulb if necessary.

          - While firmly holding the pull cord, pull it briskly to start the engine.

          - Once the engine starts, slowly transition the choke to the "run" position.

         Operator 2:

          - Gradually increase the engine throttle to engage the auger into the ground.

          - Maintain a firm grip on the handles and use body weight to push the auger down.

        > Both operators should work together to maintain a steady pace and control the direction of the hole.

        > Use the depth markings on the auger to reach the desired hole depth.

        > Now, gently guide the auger bit into the ground, applying slight downward pressure to initiate drilling.