- Farm & Garden
- Pumps & Motors
- Food Processing
- Workshop, DIY & MRO
Brand: Really
Really Heavy Duty 58-cc Petrol Chainsaw with 22 inch Guide Bar | Used for Landscaping and Cutting | RAPL-CS-5820-22
SKU: TI-RR-17753
₹8600 (Including GST)
Get extra ₹129 Discount (On Checkout)
Delivery By: Apr 15 - Apr 17
Qty:
Easy Return
& Refund
Quality
Assurance
Trusted
Delivery
After Sales
Assistance
Buyer
Protection
Short Description
58 cc Chainsaw With 22 inch(55.88 cm) Guidebar
8500 RPM
Suitable for Landscaping Purposes
Country of origin: China
Description
This Really chainsaw comes with 22 inch(55.88 cm) guide bar and 58 cc displacement which makes it more durable
It has 2.3kW engine with 8500 RPM engine speed
This chainsaw can be used in activities such as tree felling, limbing, bucking, pruning, cutting firebreaks
Features
:- Low-vibration system with damper springs to absorb vibration from engine to integrated front and rear handles.
- Enhanced air filtration; centrifugal separation system effectively removes dust particles away from intake air and reduces dust stuck on the filter.
- Easy start-up with spring-assisted recoil starter reduces user’s fatigue by the drastic reduction of resistance caused when the starter rope is pulled.
Specification
:- Brand: Really
- Power : 2.3 kw
- Fuel Used : Petrol
- Displacement : 58 cc
- Stroke : 2
- Model No : RAPL-CS-5820-22
- Fuel Used : Petrol
- Displacement : 58-cc
- Fuel Used : Petrol
- Engine Power : 2.3 kW
- Ideal Speed : 3200 + 200 RPM
- Engine Speed : 8500 RPM
- Bar Length : 22 inch(55.88 cm) Approx.
Usage :
- This chainsaw can be used to clear fallen trees or cutting through dense vegetation to create pathways and clearings.
Usage
:Before you start :
> Check the petrol (fuel) supply and add petrol if required.
> Take all the necessary safety precautions.
Starting the engine :
> Check the chain brake and engage it so that the chain don't move while operating.
> Turn the on/off switch to the "on" position and open the choke.
> Press the fuel primer button several times to fill the fuel from the tank into the carburetor.
> Pull the starter cord then push the choke back in halfway when the engine starts to turn over. Pull the starter cord again.
> Adjust the choke to the “run” position once the engine is running.
> Allow the engine to be idle for about a minute to get warm and start working.
> Turn the on/off switch to the “off” position when you’re ready to stop your chainsaw.
