Heavy Duty 4 Stroke 6.5HP, 4 Inch Petrol Operated Water Pump

Features

• Potable Design : It is designed to handle the most toughest jobs like irrigating a field, draining a pool in no time, pump out a flooded trench, fill or empty a water storage tank.
• Extra Lifting Capacity:  It has higher suction power and give high discharge in its operating range.
• Highly efficient, energy-saving, lightweight, and compact easily maintainable design that is required in irrigation.

Specification

• Inlet / Outlet Port (Diameter) : 4 x 4 inches (10.1 cm)
• Starting System : Recoil 
• Pump Lift : 28 Meter
• Suction Head : 8 Meter
• Water Output Capacity : 1400 LPM
• Fuel Tank Capacity : 3.6 Liter
• Engine Oil Capacity : 0.6 L

Accessories

• Foot Valve
• Washers
• Clamps
• Coupling
• Toolkit
•  Manual
•  Rubber Feet

Usage

• Fill the tank with unleaded petrol
• Attach the suction hose to the pump & intake and the delivery hose to the outlet.
• Ensure all connections are secure and leak-free.
• You prime the pump by filling it with water through the priming plug. This removes air and prepares it to draw water effectively

• Ensure the fuel valve is open, allowing petrol to flow to the engine .If the engine is cold, engage the choke.
• Pull the recoil starter cord gently until you feel resistance, then give it a sharp tug.
• Repeat until the engine starts.
• Once the engine starts, gradually disengage the choke as it warms up.
• Adjust the throttle to control the water flow rate

• Turn off the engine and allow it to cool before refueling.

Applications

• Used in agriculture fields, irrigation, farming land, gardening, farm-houses, fountains, drain water from a basement or shallow flooded areas, drain and fill a swimming pool or dam.